MaterialCalc

Home › Gravel Calculator › This size

How Much Gravel for 20×10 ft at 4 Inches Deep?

20 ft × 10 ft at 4 inches deep needs 2.47 yd³ of gravel — about 3.46 tons, or 139 bags of 50 lb stone. Bulk is usually near $111 before delivery; bags run about $834. Change the numbers below and the figures follow.

Answer: 2.47 cubic yards

How many tons of gravel for 20×10 ft?

MeasureFigure
Area200 ft²
Depth4 in
Volume66.7 ft³ (2.47 yd³)
Weight @ 1.4 t/yd³3.46 tons
50 lb bags139 bags (~$834)
Bulk loose2.47 yd³ (~$111 before delivery)

At 3.46 tons, plan on bulk. That is roughly 5 half-yard pickup trips if you self-haul — or one dump delivery. Watch the payload sticker: a half-ton truck is only rated for about 1,000 lb.

4 in suits a path or a driveway surface on an existing base. On bare soil for cars, step up to 6 in compacted in lifts.

One cubic yard at this depth covers about 81 ft².

If the area is a different size

Same 4 inch depth:

SizeGravel at 4 in
10×101.23 yd³ · 1.73 tons
16×81.58 yd³ · 2.21 tons
12×121.78 yd³ · 2.49 tons
30×103.70 yd³ · 5.19 tons
30×124.44 yd³ · 6.22 tons

How it changes with depth (in)

Same area, different depth (in):

Depth (in)246
Gravel needed1.23 cubic yards2.47 cubic yards3.70 cubic yards
Depth2 in4 in6 in

What 20×10 ft at 4 inches deep actually involves

20×10 ft at 4 in is 3.46 tons: a small bulk order. It is 5 pickup loads if you collect it, or one small dump delivery. Collecting it yourself is usually cheapest, but check the real payload of your truck: a half-ton pickup is only rated for about 1,000 lb, which is a third of a cubic yard, and most people quietly overload it. Go by the rated payload, not by what fits.

The area is 200 ft². At 4 in deep that is 66.7 ft³ of stone, or 2.47 yd³. Gravel is sold by weight, so the number that matters at the yard is 3.46 tons, assuming the usual ≈1.4 tons per cubic yard. Everything below is worked out from those figures.

Base course or surface dressing?

4 in is a path and topping depth. It is enough to keep a walking route clean and mud-free, and enough to refresh the surface of a driveway that already has a sound base. For a driveway carrying cars, 4 in on bare ground will rut and disappear into the soil within a season unless it sits on compacted crushed base.

Match the depth to the job rather than picking a number:

UseDepthWhat goes below
Decorative bed, top-up2 inwoven weed fabric over soil
Garden path, foot traffic2–4 incompacted sub-base or fabric
Driveway surface layer2–3 in4–6 in compacted crushed base
Driveway base, bare ground6 in+geotextile on soft soil

Ordering: bags, tons or trucks

OptionQuantityEstimated cost
50 lb bags139 bags$834
Bulk, loose2.47 yd³ — 3.46 tons$111
Pickup collection5 trips$111 + fuel
Dump truck delivery1 load$111 + delivery
Perimeter edging63 lin ft20 ft + 10 ft doubled, plus 5% for corners

The area is 20 ft × 10 ft, so the longest single run is 20 ft and the short side is 10 ft. Rake in strips along the long run rather than across it — you will do fewer, longer passes and the surface comes out more even. Perimeter edging is about 63 linear ft.

Bulk comes to about $111 for 2.47 yd³ against $834 in 50 lb bags — a large saving that gets bigger as the order grows. Bagged stone only makes sense when the quantity is tiny or the truck cannot reach the spot.

Costs assume $6 per 50 lb bag and $45 per cubic yard loose. Weight uses 1.4 US tons per cubic yard, though decorative and lighter stone runs nearer 1.25 and dense crushed rock up to 1.45. Delivery and minimum-order charges are local, so get a delivered price before you decide.

Laying gravel so it stays put

  1. Strip the topsoil. Gravel spread over grass or soft earth sinks within a season — the soil pumps up through it and the surface turns to mush.
  2. On soft ground lay a woven geotextile before any stone. It separates the stone from the soil so the two do not mix, and it does most of the work of keeping the surface firm.
  3. Build in lifts. Compact each ≤4 in layer with a plate compactor before the next, and water it lightly as you go so the fines bind.
  4. You are moving 3.46 tons — about 2.47 yd³. Work from the far end back toward the entrance so you are not walking on the finished surface.
  5. Edge it, or it will migrate into the lawn. Timber, steel strip or a shallow concrete curb all work; without an edge the stone spreads a little further every month.
  6. Weed fabric belongs under decorative beds, not under a driveway base: traffic tears it, and once it rucks it creates a soft spot right where you need the surface firmest.

Common questions

How much gravel do I need for 20×10 ft at 4 inches?

About 2.47 cubic yards, or 3.46 tons. That is 200 ft² at 4 in deep (66.7 ft³). Divide by 27 for yards, then multiply by 1.4 for tons.

How many 50 lb bags of gravel for 20×10 ft?

139 bags. Each bag is 50 lb, so 3.46 tons is 6914 lb of stone. Bags make sense only when the order is small or access is tight.

Is bulk cheaper than bags for this job?

Yes on material: about $111 loose versus $834 in bags. Add delivery, then compare — bulk still wins at this size for most yards.

How deep should gravel be here?

This page is calculated at 4 inches. Use 2 in for a decorative finish, 4 in for a path or surface layer, and 6 in compacted in lifts for a driveway base on bare ground.

How many pickup loads is 3.46 tons?

About 5 trips if you allow half a cubic yard per trip. Do not fill past the payload rating on the door sticker.

Other sizes