Home › Paint Calculator › This size
How Much Paint for a 12×14 Room with an 8 ft Ceiling?
A 12 ft × 14 ft room with 8 ft ceilings needs about 3 gallons of wall paint for 2 coats. That is 416 ft² of wall, less 51 ft² for 1 door and 2 windows, 2 times over, divided by 350 ft² per gallon.
Answer: 3 gallons
Where the 3 gallons come from
| Step | Figure |
|---|---|
| Perimeter of the room | 52 ft |
| Wall area (perimeter × 8 ft ceiling) | 416 ft² |
| Less 1 door at 21 ft² and 2 windows at 15 ft² | −51 ft² |
| Paintable wall | 365 ft² |
| Times 2 coats | 730 ft² |
| Divided by 350 ft² per gallon | 2.09 → 3 gallons |
One coat would be 2 gallons. Buying the second coat now is almost always right: a single coat over an existing colour rarely covers evenly, and the difference is one can that stores for years.
Ceiling, trim and primer — what this page does not count
The figure above is walls only. The ceiling of a 12×14 room is 168 ft², so one coat needs about 1 gallon. Skirting and trim are measured by length rather than area — a single coat on the 52 ft around this room usually comes out of well under half a gallon. Primer is a separate purchase and covers at roughly the same rate as paint; bare drywall, patched walls and big colour changes all need it, and skipping it is the most common reason a two-coat job still looks patchy.
Other room sizes
Two coats on 8 ft ceilings, doors and windows deducted:
| Size | Paint (×2 coats, 8 ft ceiling) |
|---|---|
| 10×11 | 2 gallons |
| 10×12 | 2 gallons |
| 12×12 | 2 gallons |
| 12×16 | 3 gallons |
| 14×16 | 3 gallons |
How it changes with coats
Same area, different coats:
| Coats | 1 | 2 | 3 |
|---|---|---|---|
| Paint needed | 2 gallons | 3 gallons | 4 gallons |
| Openings deducted | 51 ft² | 51 ft² | 51 ft² |
What a 12×14 room with an 8 ft ceiling actually involves
At 12×14 ft this is the size of a typical bedroom, home office or dining room. Stripping out the openings leaves about 365 ft² of wall to cover, and at 2 coats that is 730 ft² of paint. It is a comfortable one-person weekend job, and the only real decision is whether to roll or spray.
Four walls give 416 ft² of raw surface. After 1 door and 2 windows — deducted at 21 ft² and 15 ft² each — you are painting 365 ft². At 2 coats and 350 ft² per gallon, that rounds up to 3 gallons. Everything below comes from those figures.
Where the square footage goes
| Surface | Area | Notes |
|---|---|---|
| Two 14 ft walls | 224 ft² | 14 ft × 8 ft each |
| Two 12 ft walls | 192 ft² | 12 ft × 8 ft each |
| Walls, gross | 416 ft² | perimeter of 52 ft × 8 ft ceiling |
| Doors deducted | 21 ft² | 1 × 21 ft² |
| Windows deducted | 30 ft² | 2 × 15 ft² |
| Paintable wall | 365 ft² | what the 3 gallons actually covers |
The footprint is 12 ft × 14 ft, so the two 14 ft walls are the long runs and the two 12 ft walls are the short ends. The long walls roll quickly; the short ends carry the corners and usually the door, so allow more cutting-in time per foot there.
At 8 ft the ceiling line is reachable from a stepladder, so the fiddly part of this job is cutting in, not reaching.
Working at an 8 ft ceiling
An 8 ft ceiling is the straightforward case. A 6 ft stepladder puts the top of the wall comfortably in reach, and the ceiling line itself can be cut in from the floor with an extension pole. Expect to reposition the ladder about 7 times around the 52 ft of wall.
One coat, two coats, three coats
Most repaints need two coats, but the quantity changes sharply with each pass, so it is worth seeing the three side by side:
| Coats | Paint required | Typical use |
|---|---|---|
| 1 | 2 gallons | same colour, already primed, or a touch-up |
| 2 | 3 gallons | the standard: full colour change and durability |
| 3 | 4 gallons | dark over light, bare drywall, or a deep accent colour |
This page is worked through at 2 coats, which is why the answer box says 3 gallons. If you are painting a dark wall back to a light colour, treat two coats as the minimum and buy for three — running out mid-wall is worse than a spare can.
Ceiling, trim and primer — the extras
The calculator covers walls only. If you are doing the whole room, these are the add-ons:
| Item | Quantity | Notes |
|---|---|---|
| Ceiling | 168 ft² — about 1 gallon per coat | 12 ft × 14 ft flat area, priced as a separate surface |
| Baseboard and trim | 49 lin ft — about 1 quart | trim paint covers roughly 100 linear ft per quart |
| Primer | 2 gallons | one coat over 365 ft²; needed over bare drywall or a dark colour |
Primer is usually cheaper per gallon than colour and does two jobs: it seals bare drywall so the topcoat does not get sucked in, and it lets a colour change cover properly in two coats instead of three. Skimping on primer is the most common reason a two-coat job turns into a four-coat job.
Buying the paint
| Option | Quantity | Estimated cost |
|---|---|---|
| Single gallons | 3 | $114 |
| 5 gallon pail | not worth it below 5 gal | — |
At 3 gallons you are below the level where a 5 gallon pail pays off, so buy single cans. Buy them all in one trip and check the batch codes match: two cans from different batches can be slightly different tints, and a wall repainted from a mismatched can shows the seam forever.
Costs assume $38 per gallon and $165 per 5 gallon pail of mid-range interior paint ($30 per gallon of primer, $16 per quart of trim enamel). Brand, sheen and finish move these numbers a lot, so treat them as a planning figure rather than a quote.
Common questions
How much paint do I need for a 12×14 room?
About 3 gallons for the walls at 2 coats. The walls are 416 ft², less 51 ft² of doors and windows, doubled for two coats, then divided by 350 ft² per gallon. Ceiling and trim are extra.
How many coats of paint for a 12×14 room?
Two. One coat over an existing colour almost always shows through, and the second coat is what gives an even finish and the scrub resistance you paid for. This page is calculated at 2 coats, so a genuine one-coat job needs only 2 gallons.
Do I need to deduct doors and windows?
Yes — 1 door at 21 ft² and 2 windows at 15 ft² comes to 51 ft² you are not painting. That deduction is often the difference between 3 gallons and one more can.
How much paint for the ceiling of a 12×14 room?
1 gallon for one coat on 168 ft². Ceilings are normally painted in a single coat with a flat ceiling white — there is no wear on them and no colour to cover.
Do I need primer?
If the walls are bare drywall, freshly patched, or you are going from a dark colour to a light one, yes. Primer covers at roughly the same rate as paint, so budget a similar quantity for one coat. Over an already-painted wall in a similar colour you can usually skip it.
Why does the calculator use 350 ft² per gallon?
350 ft² per coat is the conservative working number. Cans often claim 400 ft², but that assumes a smooth, primed, non-porous surface applied at exactly the right film thickness. Rough or unpainted drywall can drop to around 300 ft². Using the lower figure is why this estimate does not leave you half a wall short.
Other sizes
- How Much Paint for a 10×10 Room with an 8 ft Ceiling?
- How Much Paint for a 10×10 Room with a 9 ft Ceiling?
- How Much Paint for a 10×10 Room with a 10 ft Ceiling?
- How Much Paint for a 12×12 Room with an 8 ft Ceiling?
- How Much Paint for a 12×12 Room with a 9 ft Ceiling?
- How Much Paint for a 12×12 Room with a 10 ft Ceiling?
- How Much Paint for a 10×12 Room with an 8 ft Ceiling?
- How Much Paint for a 10×12 Room with a 9 ft Ceiling?
- How Much Paint for a 10×12 Room with a 10 ft Ceiling?
- How Much Paint for a 12×14 Room with a 9 ft Ceiling?